Very fine, white, filamentous powder with a low specific weight. When added in small quantities (10-12% by volume) to the C-Systems 10 10 CFS resin compound (A+B), it slightly increases its density and makes the gluing areas such as grooves, joints, etc. more filling. By maintaining a larger quantity of resin, it transfers it to the wood, which has the ability to absorb it and form a more homogeneous and resistant joint. A larger quantity makes the resin spreadable even when placed vertically. Natural microfibers are also used as a thickener for C-systems 10 10 Classic when this resin is desired to be used as a filler. When you also want to "lighten" it, first add the white microspheres (50-70% by volume) to the C-systems 10 10 Classic and then gradually add small quantities of Natural Microfibers in several additions to obtain the desired density. The resulting mixture can be used for corner joints (using a rounded plywood strip with the required radius achieves an aesthetically pleasing result), for filling screw holes that have dented the wood, for small plywood flakes (apply a larger amount and then sand it evenly), for filling dents and missing corners. It is recommended to apply the resulting mixture over a previous application of the same resin (A+B) undiluted and applied to the affected area for at least 10-20 minutes. If more than 24-48 hours have passed since application, it is necessary to finely wet sand the area before applying the final sealant. Natural microfibers mixed "dry" in a 5:1 ratio with "preferred" wood dust are ideal, with C-systems, for creating exposed filler joints.
B00J03AWJW - EAN: 8021931020051
